Planet

VC-820M 8-Port VDSL2 + 2G TP/SFP Managed Switch

Planet VC-820M 8-Port VDSL2 SNMP Managed Switch with 2-Port Gigabit Combo SFP? - 30a

SKU: NS031



High Performance VDSL2 Data Rate over Existing Phone Lines
PLANET VC-820M is an 8-Port VDSL2 Managed CO (Central Office) Switch with 2 Gigabit TP/SFP combo interfaces. The VDSL2 CO Switch is perfectly designed for the networking applications of communities, network service providers, SIs, IP surveillance providers, etc. It is based on two core networking technologies, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). Worked with PLANET VC-23x series of VDSL2 CPE (Customer Premises Equipment), the VC-820M offers the absolutely fastest data transmission speeds over the existing copper telephone lines providing an ideal solution to the last-mile connectivity.

Each VDSL2 interface of the VC-820M provides two copper phone ports, one for VDSL2 connection and the other one for POTS (Plain Old Telephone Service) connection. To share the existing phone line with POTS, the VC-820M has a built-in POTS splitter that helps the voice over telephone and network data to transmit over the same wire without being interrupted.

Delivering Highly-demanding Connectivity for ISPs/Triple Play Devices
As the demand for home broadband connections increases, the VDSL2 technology is the next media to support the integration of home services and provides a significant transmission speed faster than that of the current cable modem and ADSL technology. The VC-820M applies the EoVDSL (Ethernet over VDSL) to providing up to 100Mbps download capability and makes the following multi-media services more efficient on the local network:
■ IPTV/HDTV
■ VoD (Video on Demand)
■ Voice over IP
■ Video Conferencing/Video Phone
■ On-line Gaming
■ Internet Radio/On-line Music
■ Long-distance Education

The VC-820M offers an excellent bandwidth to meet the requirements of the triple play devices for home entertainment and communications.

 

QoS Features to Ensure Best Performance
The VDSL2 Switch contains robust QoS features such as port-based, 802.1p priority and IP ToS/DSCP to ensure the best performance of its VoIP and video stream transmission, thus empowering the enterprises to take full advantage of the limited network resources.

Selectable VDSL2 Data Rate for Service Differentiation
Through the management interface, the administrator can control the data transmission speed of each VDSL2 interface. Telecoms and ISPs can immediately and remotely upgrade/downgrade bandwidth service upon different demands.

Efficient Management
To further expand the current network, PLANET VC-820M provides console and Telnet command line interfaces, and advanced Web and SNMP management interfaces. With its built-in Web-based management interface, the VDSL2 switch offers an easy-to-use, platform-independent management and configuration facility. The VDSL2 switch supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. For text-based management, the VDSL2 switch can also be accessed via Telnet and the console port. Moreover, the VDSL2 switch offers secure, remote management by supporting Secure Socket Layer (SSL) connection, which encrypts the packet content at each session. The features above provide an efficient way to manage the devices from the internet environment with no need to add extra secure system either by means of hardware or software.

 

Robust Layer 2 Features
For efficient management, via Web interface, the VC-820M can be programmed for basic switch management functions, such as port speed configuration, port link aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, port mirroring, Rapid Spanning Tree, and ACL security. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control to enhance bandwidth utilization.

Advanced Security
The VDSL2 switch offers comprehensive Layer 2, Layer 3 and Layer 4 Access Control List (ACL) to filter out unwanted traffic. Its protection mechanisms comprise RADIUS and port-based 802.1X user and device authentication. Moreover, the VDSL2 switch provides MAC filter, static MAC, IP/MAC binding and Port Security for enforcing security policies to the edge. The administrators can now construct highly-secured corporate networks with considerably less time and effort than before.

 

Hardware Specifications
Hardware Version 2.0
VDSL Interface 8 VDSL2 RJ11 interfaces
8 POTS RJ11 interfaces
Copper Ports 2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Port-9 and Port-10
Console 1 RS232-to-RJ45 serial port (115200, 8, N, 1)
Transient Voltage Suppressor IEC 61000-4-2 (ESD): ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT): 40A (5/50ns)
IEC 61000-4-5 (Lightning): 24A (8/20μs)
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps/non-blocking
Switch Throughput 4.16Mpps @64 bytes
Address Table 8K entries
Shared Data Buffer 256K bytes
Maximum Frame Size 9K bytes
Flow Control Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED VDSL2, PWR, SYS, LNK/ACT, 1000
Reset Button < 5 sec: System reboot
> 10 sec: Factory default
Dimensions (W x D x H) 404 x 174 x 44.5 mm, 1U height
Weight 2.4 kg
Power Requirements 100~240V AC, 50-60 Hz
Power Consumption/ Dissipation 36 watts (max.)/112.8 BTU/hr
VDSL2
VDSL2 Standard Complies with ITU-T G.993.1 and G.993.2.
Supports provisioning the VDSL optional band (25K to 138K Hz) usage
Band Plan Selectable band plan for each VDSL line on a per port basis
Band Plan A:
– Profile 998, Annex A of G.993.1; optimized for symmetric services
Band Plan B:
– Profile 997, Annex B of G.993.1; optimized for asymmetric services
Profile Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, and 30a for frequency bands (Annex A, B and C) defined in G.993.2
Encoding VDSL-DMT
VDSL2 Features Selectable rate limit control
Selectable target SNR (Signal to Noise Ratio) mode
POTS voices passthrough
Layer 2 Function
Management Interface Console, Telnet, Web browser, SSL, SNMP v1, v2c, v3
Gigabit Port Configuration Port disable/enable
Auto-negotiation
10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Gigabit Port Status Display each port’s speed duplex mode, link status and flow control status
Auto-negotiation status, trunk status
Port Mirroring TX/RX/both
1 to 1 monitor
Bandwidth Control Ingress/Egress rate limit control
Gigabit Port:
• Allow to configure per 128Kbps
VDSL2 Port:
• Allow to configure per 5Mbps
VLAN IEEE 802.1Q tag-based VLAN, up to 256 VLANs groups, out of 4094 VLAN IDs
Port-based VLAN
GVRP, up to 128 dynamic VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE/Protected port) with two protected port groups
Link Aggregation Static port trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Supports 13 groups with 8 ports per trunk
QoS 4 priority queue
Traffic classification based on
– Port priority
– 802.1p priority
– DSCP/TOS field in IP Packet
VoIP QoS by application protocol no.
IGMP Snooping IGMP (v1, v2) Snooping, up to 256 multicast groups
Access Control List IP-based Layer 3/Layer 4 ACL
Up to 220 ACL rule entries
Security Port Security (Disable per port of MAC address learning)
Static MAC, MAC filter, IP/MAC binding
SNMP MIBs RFC 1213 MIB-II
RFC 2863 Interface MIB
RFC 2665 EtherLike MIB
RFC 1493 Bridge MIB
RFC 2819 RMON MIB (Group 1, 2, 3,9)
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
IEEE 802.3z: 1000BASE- SX/LX
IEEE 802.3ab: 1000BASE-T
IEEE 802.3x: Flow control and back pressure
IEEE 802.3ad: Port trunk with LACP
IEEE 802.1D: Spanning Tree Protocol
IEEE 802.1w: Rapid Spanning Tree Protocol
IEEE 802.1p: Class of Service
IEEE 802.1Q: VLAN Tagging
IEEE 802.1x: Port Authentication Network Control
ITU-T:
G.993.1 (VDSL)
G.997.1
G.993.2 VDSL2
RFC 768: UDP
RFC 793: TFTP
RFC 791: IP
RFC 792: ICMP
RFC 2068: HTTP
RFC 1112: IGMP v1
RFC 2236: IGMP v2
Cables • VDSL2: twisted-pair telephone wires (AWG24 or better) up to 1km
• 10/100BASE-TX: 2-pair UTP Cat.5, up to 100m (328ft)
• 1000BASE-T: 4-pair UTP Cat.5E, up to 100m
• 1000BASE-SX: 50/125µm and 62.5/125µm fiber-optic cable, up to 550m
• 1000BASE-LX: 9/125µm fiber optic cable, up to 10km 50/125µm and
62.5/125µm fiber-optic cable, up to 550m
Environment
Operating Temperature: -10 ~ 50 degrees C
Relative Humidity: 10~ 90% (non-condensing)
Storage Temperature: -20 ~ 70 degrees C
Relative Humidity: 10~ 90% (non-condensing)