802.3bt PoE++ 95-watt Power over 4-pair UTP Solution As PLANET GUP-805A-95W adopts the IEEE 802.bt PoE++ standard technology, it is capable to source up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). Its power capability is three times more than that of the conventional 802.3at PoE+ and it is an ideal solution for those high power consuming network PDs, such as: PoE PTZ speed dome cameras Network devices  Thin clients AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks Remote digital signage displays PoE lightings   With a total power budget of up to 95 watts for different kinds of PoE applications, the GUP-805A-95W provide a quick, safe and higher 802.3bt PoE++ network solution for small businesses and enterprises.   Model PoE Standard PoE Budget LAN Port Speed SFP Slot Speed GUP-805A-95W IEEE 802.3af/at/bt 95 watts 10M/100M/1000Mbps 100M/1000BASE-X     High Performance and Steady Network Communications Guaranteed Despite Distance Extension The GUP-805A-95W extends communication distance with high Gigabit performance via SFP slot and SFP transceiver. The GUP-805A-95W provides media conversion between 10/100/1000BASE-T and 100/1000BASE-X interfaces for various fiber optic applications. The available SFP LC fiber interfaces are shown below:    Optic Mode Connector Type Distance Multi-mode Duplex LC 220m/550m/2km Single mode Duplex LC 20/40/60/80/120km Single mode WDM Simplex LC 2/10/20/40/80/120km     802.3bt PoE++ and DIP Switch for PoE Power Output Mode Options To meet the demand of various powered devices consuming stable PoE power, the GUP-805A-95W provide one DIP switch for multi-PoE operation modes that include 95-watt 802.3bt type-4 PoE++ mode, UPOE and legacy mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field. 802.3bt PoE++ Power Output Mode UPOE Power Output Mode Legacy Power Output Mode    PoE Mode Function BT This mode fully supports IEEE 802.3af/at/bt standards. UPOE This mode fully supports Cisco UPoE standards or PoH standards. Legacy The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard.  This protects against damage to the PDs as the right PoE mode is applied.