Synology

E10M20-T1

Synology E10M20-T1 M.2 SSD & 10GbE combo adapter card for performance acceleration

SKU: NC010



M.2 SSD & 10GbE combo adapter card for performance acceleration

 

10GbE bandwidth and M.2 SSD cache, all at once

Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS.

Hardware Specifications

General

 Host Bus Interface PCIe 3.0 x8
Bracket Height Low Profile and Full Height
Size (Height x Width x Depth) 71.75 mm x 200.05 mm x 17.70 mm
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH
Warranty 5 Years
Notes The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

Storage

 Storage Interface PCIe NVMe
Supported Form Factor 22110 / 2280
Connector Type and Quantity M-key, 2 Slots

Network

 IEEE Specification Compliance
  • IEEE 802.3an 10Gbps Ethernet
  • IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
  • IEEE 802.3ab Gigabit Ethernet
  • IEEE 802.3u Fast Ethernet
  • IEEE 802.3x Flow Control
Data Transfer Rates 10 Gbps
Network Operation Mode Full Duplex
Supported Features
  • 9 KB Jumbo Frame
  • TCP/UDP/IP Checksum Offloading
  • Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s

Compatibility

Applied Models

 NVMe SSD
  • SA series:SA3600, SA3400
  • 20 series:RS820RP+, RS820+
  • 19 series:DS2419+, DS1819+
  • 18 series:RS2818RP+, DS3018xs, DS1618+
Notes DSM version requirement: 6.2.3-25426 or later version

Related Products